LONGBOW Racing Yachts,
Victoria Class On-line Shopping Catalogue

Proceeds support the OMSA web site and the step-by-step Victoria construction guide.

"Smashing Quality Parts", Michael Beasley, Essex, England
"Thank you SOOOO much", Cathy Cain, Fort Pierce, Florida
"Very high quality stuff", Sonny Zinman, St. Albert, Alberta
"The boom-vang is very impressive", Rick Fadeley, Baltimore, MD

I am really happy with all your upgrades.
I won the Madrid League (10 Vics) and the Spain Championship! (19 Vics)
Max Kettner, Victoria ESP44, Madrid, Spain: December, 2007

"I used all your parts and 'step by step' instructions and have been very happy with the results
and in fact just scored my first club win against our local pro".
Dave Schultz and LUNA ROSSA, November, 2007, Grand Prairie, Texas

Use PAY-PAL for secure and easy on-line ordering.
You do not need a Pay-Pal account
to use their free service.

Using MS Internet Explorer with tabs turned on?
Switch back and forth between this catalog and the PayPal Shopping Cart with your tabs.

LONGBOW Victoria custom hardware kit.

one 6" double-ended servo arm (2024-T3 aluminum alloy)
one 4" mast-head crane (2024-T3 aluminum alloy)
one Du-bro rudder push-rod seal (new addition to kit)

one stainless-steel ball-bearing jib swivel
one .020" lightweight styrene hatch cover

five sail-sheet fairlead beads (21/64" o.d.)

6" of 1/4" brass angle stock for deck chain-plates

twelve 3/32" aluminum pop rivets
two 1/16" by 1/2" brass mast-head crane pins

eighteen #2 by 3/8" brass wood screws for shroud deckplates and deck cleats
four #2 by 1/4" stainless steel, sheet metal screws for the jib deck-plate
ten 1/16" brass cotter pins for boom attach points



The above items are difficult to source in small quantities and are being offered
to Victoria builders to promote this sailing class.

$24 US$...

Note: The PayPal Shopping Cart may open in a new Internet Explorer "tab".
To navigate between the OMSA Longbow catalog and the PayPal shopping cart ,
just click on the tabs located just above the PayPal screen or the Longbow catalog.

LONGBOW Victoria rigging line kit

four brass plated 2-56 clevises
four threaded 2-56 rigging couplers
four stainless s/s 2-56 locking nuts

one spool (25 ft) .015" nylon-coated stainless rigging wire
6" length of 1/16" aluminum crimp tubing

$21 US$...

 


LONGBOW Victoria pre-built mast and boom kit

The LONGBOW pre-built mast and boom kit is designed to replace the very heavy mast and booms
that come with the Victoria kit and is made of 7075 aluminum alloy throughout
and is compatible with the stock Victoria goose-neck and mast-head crane fittings.



The LONGBOW pre-built mast and boom kit is comprised of five main components:
the three piece mast and the two sail booms, all manufactured from
thin-wall 7075 aluminum alloy in 'gold' and 'platinum' finish.

The base of the mast includes the lock for the LONGBOW custom mast step
and is pre-drilled and aligned to accept the two upper mast sections.

Both main and jib booms are predrilled for the sail, sheets and boom-vang attachment points,
and the out-haul guides are pre-installed at the ends of the booms.

The total weight of the LONGBOW mast, main and jib booms is only 1.8 ounces (52 grams)

The mast kit also includes the 3/32" aluminum pop-rivets for instant assembly.

$39 US$...

 

LONGBOW Victoria custom mast step

revision Dec 13, 2006

A precision brass four-position mast-step designed for the base of the LONGBOW Victoria pre-built mast.
The kit includes the mast step and four #2 stainless screws.

With this unique LONGBOW locking design,
the LONGBOW Victoria mast is securely pinned fore-aft, side to side, and in rotation.
Now your mast may be moved and fore-aft to
control "weather helm" and prevent the mast from rotating as well.

The brass mast-step complements the brass shroud chain-plates.
weight : only 1/10 ounce (3 grams)



$18 US$.. .
 

LONGBOW Victoria custom boom-vang

New and improved design. The ultimate in elegance and simplicity.
Beautiful to look at, light weight , and precisely and quickly adjustable,
this durable vang comes complete with mounting hardware and is easily retrofitted to existing Victoria kits.
weight: only 7.2 grams ( 1/4 ounce)

$23 US$.. .
 

LONGBOW Victoria Carbon-Fiber Rudder Push-rod

This hi-tech replacement for the stock steel rudder push-rod is
light-weight, rust-proof and adjustable in length and specifically
designed for the OMSA rudder-servo location
as per the step-by-step Victoria instructions.

 

$15 US$...
 

LONGBOW 3/32" diameter all-aluminum pop-rivets

By popular demand, we are now separately packaging 3/32" diameter all-aluminum
pop-rivets which are just perfect for r/c sailboat and aircraft applications.
Our builders and racers tell us that these are not available in most cities.
Package of 50: $4.00 US$
 


LONGBOW Victoria dehydration package.

After every outing of your Victoria, this custom efficient fan and power supply will remove
all of the moisture that inevitably finds its way inside the Victoria hull.

Just plug it in and allow your radio and electrical system to get thoroughly dry
before corrosion can eat away at your servos and radio.
An added benefit is that your Victoria will not gain any unwanted weight due to moisture content.
Use this fan and power supply on any of your other sailboats as well..


note: 110-120 volt 50-60 cycle power required ...

$21 US$...
 

 

LONGBOW Battery Charger for the Spektrum DX6 Transmitter

The high capacity 9.6 volt, 2300 to 2500 mah Ni-MH battery pack that can be installed in the Spektrum DX6 transmitter units requires a more powerful battery charger than is supplied by the manufacturer. The charger supplied with the Spektrum DX6 ystem was designed as an overnight charger for the stock 9.6 volt 600 mah Ni-Cd battery and has a difficult time fully charging larger and more powerful battery packs.

Designed to plug into the DX6 transmitter, the custom LONGBOW 2300 charger will fully charge a Sanyo 2300-2700 mah Ni-MH pack in 10-12 hours and can also be used for a quick top-up-charge for 1 hour for the stock 600 mah battery.

These larger battery packs are now readily available from Horizon Hobbies in the US and have sufficient
battery life for the extended sailing time required for a sailing regatta.

$29 US$...

 

Ordering from outside North America??
As all orders are shipped via airmail, and we have endeavored
to keep our shipping and handling charges to a minimum,
a modest shipping surcharge is required for all orders
placed from outside North America.
Thank you for your understanding.

Airmail postage surcharge for orders outside North America

$6 US$

Don't see what you need?
Need a custom mast?

Custom parts for other model yachts available upon request.

email us and let us know what you require.
Our aim is to please at LONGBOW Racing Yachts.

LONGBOW Victoria Class Racing Sails

manufactured by:

BlackMagick Sails, Auckland, New Zealand

Black Sails, San Diego, California

Due to high demand and current shortages, please email or call us for current availability and price.

stepbystepvictoria@shaw.ca

 

Custom built LONGBOW Victoria R/C racing yachts

built to order and race-ready.
Not just a race boat, but a true work of art.
(more details here)


$890 US$..
 

Airmail Shipping and Handling rates to
North American destinations.

$.01 - 49.99 .... $8.00
$50.00 - 99.99... $10.00
$100.00 - 499.99...$15.00
$500.00- $799.00...$25.00
$800.00 and up.........$70.00

Note: For anything other than a completed custom sailboat, only $6.00 extra will ship your order anywhere in the world. (Europe, N.Z., Australia or South America).

For a complete custom sailboat, please email for a quote for the extra shipping costs and desired options.

 International Postal Money Orders also accepted and payable to:

James Anderson
1640 Gillard Drive, Kelowna, B.C
V1Y 4K1, Canada

Proceeds support StepByStep Victoria

 

stepbystepvictoria@shaw.ca
James Anderson
1640 Gillard Drive, Kelowna, B.C. V1Y4K1 Canada
telephone: 250-763-6012

Forward to OMSA Step-by-Step
Back to OMSA front page